Ohio Sportsman - Your Ohio Hunting and Fishing Resource banner

1 - 4 of 4 Posts

·
Registered
Joined
·
20 Posts
Discussion Starter #1
Is there anyone else reloading for the 350 Legend? I have only reloaded the Barnes 140 gr XPB bullets. I have found two other bullets that I would like to load. I also have two powders that would like to use with these bullets. I have the Hornady 170 gr Interlock and the Maker 150 gr Rex bullets. The powders that I have are Hodgdon H110 and Hodgdon Lil-Gun. I have been searching for a starting load for both these bullets with both of these powders without much success. Is there anyone here that that could point me in the correct direction? Thank you all in advance for your help with this matter.
 

·
Registered
Joined
·
742 Posts
Good luck! It's so new this is going to be tough. I will say I shoot the factory loaded Hornady and it's devastating on deer. If you live near Dayton I've got 350L brass you can have.
 

·
Registered
Joined
·
110 Posts
I haven't reloaded for mine yet (I need to get to the range and empty some brass). I don't have any data for the Rex bullet, but here is some info for your Hornady bullets and Lil Gun and H110 from Hodgdon's website. I hope this helps!

54273
54274
20210401_092331.jpg
20210401_092354.jpg
 

·
Registered
Joined
·
666 Posts
I’ve done a lot of higher end work with the 170 and 165 Hornady’s using Lil Gun. Pushed the 170 gr to 2550fps in 22” barrel and 2450fps with the 165 FTX..


Sent from my iPad using Tapatalk
 
1 - 4 of 4 Posts
Top