PDA

View Full Version : need some help please ....




mullskinner
02-14-2006, 09:45 PM
well my boyz at trad. gang wasn't much help ..:whistle:
prolly was shunned .. :rolleyes: thats another story :rant:
read post please ... :)

http://tradgang.com//noncgi/ultimatebb.php?ubb=get_topic;f=6;t=001699




coonskinner
02-14-2006, 09:52 PM
are you picking up the flight of your arrow???do they seem to fly straight...its hard to tell bout arrow angling in target,you may be shooting at a very small angle to the target not realizing it...also is the target moving when the arrow hits...:mischeif:

mullskinner
02-14-2006, 09:56 PM
target ain't movin thats what i thought might be the angle but i'm straight on ..this close it's hard to tell looks like it's a straight flight ..

coonskinner
02-14-2006, 10:00 PM
mine do this too sometimes but they are flying straight...if you can find somebuddy to stand behind you when you shoot ...they should be able to see if the arrow is going straight or wobbling...:mischeif:

mullskinner
02-14-2006, 10:05 PM
i got to go outside and shoot so i can see the flight of the arrow i'm braced at 7 1/2 " nock over at 1/8 "on the nock set.. bow seems super smooth i hate shooting close i can't pick up arrow flight ...:rolleyes:

mullskinner
02-14-2006, 10:15 PM
looks like it's tail whipping to the right ... 1816 's ?? maybe ...

mullskinner
02-14-2006, 10:37 PM
took the block outside at 18 yrds ( far as i could see in the light ) and there right down the pike ..impact straight ...must just be to close inside ...need a bigger indoor range ...:rolleyes:

thanks coonskinner......

coonskinner
02-15-2006, 04:56 AM
1/8 is very low...most of mine is set at 1/4 high...the kadiak at 3/8...and some:mischeif: trads go to 1/2...

mullskinner
02-15-2006, 06:21 AM
1/8 " is low even when nock is over and not under :confused:

Jayme
02-15-2006, 08:39 AM
I have some 2016 superslams, out of my 40# recurve they shot pretty straight, but I recently started shooting a 50# recurve and it has a rest on it, and those seem to be sticking sideways like you said. My problem is that I haven't adjusted the nocks yet so that the feathers wont slide across the side of the bow, would this contribute to kicking the arrow sideways a little?

EDIT: I am also using 100 gr. tips, should I try to bump up to 125?

Thunderflight
02-15-2006, 08:57 AM
I used to get some wobble out of my old GT 3555's, but the new traditional 3555's are a bit heavier and fly like darts.

So your shunned on Tradgang? Seems to be alot of that going on lately.

noboatdave
02-15-2006, 09:14 AM
Did you try bareshaft tuning them? OL's method worked for me. http://bowmaker.net/index2.htm

Doesn't look like they shunned you. Less than 2 hours after your first post Rod Jenkins, 2004 IBO Hunter Class World Champion, offered some advice.

coonskinner
02-15-2006, 03:43 PM
there you go mullskinner...:mischeif:

mullskinner
02-15-2006, 03:59 PM
Did you try bareshaft tuning them? OL's method worked for me. http://bowmaker.net/index2.htm

Doesn't look like they shunned you. Less than 2 hours after your first post Rod Jenkins, 2004 IBO Hunter Class World Champion, offered some advice.
i saw that .....;) i couldn't beleive it :eek: he might know a thing or two about archery .. :coolgleamA:

i still got a couple trad gang buddie's left this one for sure ...RAVEN ..:bouncy:

http://tradgang.com/cgi-bin/ultimatebb.cgi?ubb=get_pm;d=V;t=00035231

coonskinner
02-15-2006, 04:13 PM
yup...:mischeif:

mullskinner
02-15-2006, 04:15 PM
i saw that .....;) i couldn't beleive it :eek: he might know a thing or two about archery .. :coolgleamA:

i still got a couple trad gang buddie's left this one for sure ...RAVEN ..:bouncy:

http://tradgang.com/cgi-bin/ultimatebb.cgi?ubb=get_pm;d=V;t=00035231
yep ;)

coonskinner
04-08-2007, 11:59 AM
well i clicked in on the writing an see a piv. of a 2 pc. take down that screws tuhgether...:confused:

mullskinner
04-08-2007, 12:04 PM
well i clicked in on the writing an see a piv. of a 2 pc. take down that screws tuhgether...:confused:

:nono: coon were not aloud there no more ....:nono: well uhm not but the kadiak kid is ...:eek: :eek:

coonskinner
04-08-2007, 12:40 PM
:nono: coon were not aloud there no more ....:nono: well uhm not but the kadiak kid is ...:eek: :eek::nono: